Lack个人博客
所有文章 标签 分类 作者 关于 简体中文
Lack个人博客

目录

iscsi共享磁盘服务

Lack 收录于 运维
   约 2917 字   预计阅读 6 分钟 

http://image.xingyys.club/blog/iscsi.jpg

iscsi简单介绍

iSCSI（Internet Small Computer System Interface，发音为/ˈаɪskʌzi/），Internet小型计算机系统接口，又称为IP-SAN，是一种基于因特网及SCSI-3协议下的存储技术，由IETF提出，并于2003年2月11日成为正式的标准。与传统的SCSI技术比较起来，iSCSI技术有以下三个革命性的变化：

  • 把原来只用于本机的SCSI协义透过TCP/IP网络发送，使连接距离可作无限的地域延伸；
  • 连接的服务器数量无限（原来的SCSI-3的上限是15）；
  • 由于是服务器架构，因此也可以实现在线扩容以至动态部署。

简单的说就是tcp协议仿真scsi，将本地的磁盘通过网络共享给其他机器，提供数据的远程存储。

iscsi基本概念

iscsi中有一些常用的基本概念，了解这些能帮助我们认识iscsi服务的具体工作原理，下面就用一张图表来说明：

名词 说明
ACL 访问权限控制列表，用来验证客户端启动器的访问，通常是客户端 iSCSI 启动器的 IQN 名称
IQN 用于标识单个 iSCSI 目标和启动器的唯一名称(全部小写)
WWN 用于标识单个光纤通道端口和节点的唯一编号
TARGET iSCSI 服务器上的存储资源
LUN iSCSI 服务器上的块设备
initiator(启动器) 以软件或硬件实施的 iSCSI 客户端
NODE 单个 iSCSI 启动器或者目标
TPG 启动器或者目标上的单个 IP 连接地址
Portal 网络接口及端口

iscsi 安装配置

iscsi 服务管理的软件有多个，这里就简单介绍两个，targetcli和tgt。

使用targetcli管理配置iscsi

1.准备阶段 有两台linux机器，分别作为服务端和客户端。实验环境最好在虚拟机上，方便修改的反复操作。同时在服务端上有一块磁盘作为iscsi共享磁盘。

 1
 2
 3
 4
 5
 6
 7
 8
 9
10

[root@localhost ~]# lsblk 
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   40G  0 disk 
├─sda1   8:1    0  500M  0 part /boot
├─sda2   8:2    0    4G  0 part [SWAP]
└─sda3   8:3    0 35.5G  0 part /
sdb      8:16   0   10G  0 disk 
└─sdb1   8:17   0   10G  0 part 
sdc      8:32   0   10G  0 disk 
sr0     11:0    1 1024M  0 rom

这个选择/dev/sdb1,没有的同学可以使用fdisk命令自己分配一个。 2.安装targetcli

1

yum install -y targetcli

还需要启动targetcli服务

1

systemctl start target

3.配置targetcli 配置targetcli有几个步骤，添加target，在target上添加lun，将target共享到指定网段。 先来创建一个块设备，使用命令为： /backstores/block create westos:storage1 /dev/sdb1 进入targetcli操作：

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21

[root@localhost ~]# targetcli
Warning: Could not load preferences file /root/.targetcli/prefs.bin.
targetcli shell version 2.1.fb46
Copyright 2011-2013 by Datera, Inc and others.
For help on commands, type 'help'.

/> /backstores/block create westos:storage1 /dev/sdb1
Created block storage object westos:storage1 using /dev/sdb1. # 注意这里就成功创建一个快设备
/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- westos:storage1 .............................................................. [/dev/sdb1 (0 bytes) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 0]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 0]
  o- loopback ......................................................................................................... [Targets: 0]
/>

接着创建一个iscsi共享的target，使用命令为： /iscsi create iqn.2018-10.com.westos:storage1 这里的target名称其实可以随意，但一般格式为iqn.year.month.com.domain.xxx, 执行的结果如下：

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

/> /iscsi create iqn.2018-10.com.westos:storage1
Created target iqn.2018-10.com.westos:storage1.
Created TPG 1.
Global pref auto_add_default_portal=true
Created default portal listening on all IPs (0.0.0.0), port 3260.
/> ls
o- / ......................................................................................................................... [...]
  o- backstores .............................................................................................................. [...]
  | o- block .................................................................................................. [Storage Objects: 1]
  | | o- westos:storage1 .............................................................. [/dev/sdb1 (0 bytes) write-thru deactivated]
  | |   o- alua ................................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ....................................................................... [ALUA state: Active/optimized]
  | o- fileio ................................................................................................. [Storage Objects: 0]
  | o- pscsi .................................................................................................. [Storage Objects: 0]
  | o- ramdisk ................................................................................................ [Storage Objects: 0]
  o- iscsi ............................................................................................................ [Targets: 1]
  | o- iqn.2018-10.com.westos:storage1 ................................................................................... [TPGs: 1]
  |   o- tpg1 ............................................................................................... [no-gen-acls, no-auth]
  |     o- acls .......................................................................................................... [ACLs: 0]
  |     o- luns .......................................................................................................... [LUNs: 0]
  |     o- portals .................................................................................................... [Portals: 1]
  |       o- 0.0.0.0:3260 ..................................................................................................... [OK]
  o- loopback ......................................................................................................... [Targets: 0]
/>

之后还需要将target共享出去： /iscsi/iqn.2018-06.com.westos:storage1/tpg1/acls create iqn.2018-06.com.example:westoskey #cal配置 /iscsi/iqn.2018-06.com.westos:storage1/tpg1/luns create /backstores/block/westos:storage1 #luns配置 /iscsi/iqn.2018-06.com.westos:storage1/tpg1/portals/ create 172.25.254.101 #portals配置

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

/> /iscsi/iqn.2018-10.com.westos:storage1/tpg1/acls create iqn.2018-10.com.example:westoskey
Created Node ACL for iqn.2018-10.com.example:westoskey
/> /iscsi/iqn.2018-10.com.westos:storage1/tpg1/luns create /backstores/block/westos:storage1
Created LUN 0.
Created LUN 0->0 mapping in node ACL iqn.2018-10.com.example:westoskey
/> /iscsi/iqn.2018-10.com.westos:storage1/tpg1/portals/ create 192.168.3.150
Using default IP port 3260
Could not create NetworkPortal in configFS
/> ls
o- / ............................................................................................................. [...]
  o- backstores .................................................................................................. [...]
  | o- block ...................................................................................... [Storage Objects: 1]
  | | o- westos:storage1 .................................................... [/dev/sdb1 (0 bytes) write-thru activated]
  | |   o- alua ....................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ........................................................... [ALUA state: Active/optimized]
  | o- fileio ..................................................................................... [Storage Objects: 0]
  | o- pscsi ...................................................................................... [Storage Objects: 0]
  | o- ramdisk .................................................................................... [Storage Objects: 0]
  o- iscsi ................................................................................................ [Targets: 1]
  | o- iqn.2018-10.com.westos:storage1 ....................................................................... [TPGs: 1]
  |   o- tpg1 ................................................................................... [no-gen-acls, no-auth]
  |     o- acls .............................................................................................. [ACLs: 1]
  |     | o- iqn.2018-10.com.example:westoskey ........................................................ [Mapped LUNs: 1]
  |     |   o- mapped_lun0 ........................................................... [lun0 block/westos:storage1 (rw)]
  |     o- luns .............................................................................................. [LUNs: 1]
  |     | o- lun0 ............................................... [block/westos:storage1 (/dev/sdb1) (default_tg_pt_gp)]
  |     o- portals ........................................................................................ [Portals: 1]
  |       o- 0.0.0.0:3260 ......................................................................................... [OK]
  o- loopback ............................................................................................. [Targets: 0]
/>

有一个报错信息：

1

Could not create NetworkPortal in configFS

原因是再/iscsi/portals/下已经存在IP地址。可以直接跳过，获取删除，重新创建。

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

/> /iscsi/iqn.2018-10.com.westos:storage1/tpg1/portals/ delete 0.0.0.0 3260
Deleted network portal 0.0.0.0:3260
/> /iscsi/iqn.2018-10.com.westos:storage1/tpg1/portals/ create 192.168.3.150
Using default IP port 3260
Created network portal 192.168.3.150:3260.
/> ls
o- / ............................................................................................................. [...]
  o- backstores .................................................................................................. [...]
  | o- block ...................................................................................... [Storage Objects: 1]
  | | o- westos:storage1 .................................................... [/dev/sdb1 (0 bytes) write-thru activated]
  | |   o- alua ....................................................................................... [ALUA Groups: 1]
  | |     o- default_tg_pt_gp ........................................................... [ALUA state: Active/optimized]
  | o- fileio ..................................................................................... [Storage Objects: 0]
  | o- pscsi ...................................................................................... [Storage Objects: 0]
  | o- ramdisk .................................................................................... [Storage Objects: 0]
  o- iscsi ................................................................................................ [Targets: 1]
  | o- iqn.2018-10.com.westos:storage1 ....................................................................... [TPGs: 1]
  |   o- tpg1 ................................................................................... [no-gen-acls, no-auth]
  |     o- acls .............................................................................................. [ACLs: 1]
  |     | o- iqn.2018-10.com.example:westoskey ........................................................ [Mapped LUNs: 1]
  |     |   o- mapped_lun0 ........................................................... [lun0 block/westos:storage1 (rw)]
  |     o- luns .............................................................................................. [LUNs: 1]
  |     | o- lun0 ............................................... [block/westos:storage1 (/dev/sdb1) (default_tg_pt_gp)]
  |     o- portals ........................................................................................ [Portals: 1]
  |       o- 192.168.3.150:3260 ................................................................................... [OK]
  o- loopback ............................................................................................. [Targets: 0]
/>
/> exit
Global pref auto_save_on_exit=true
Last 10 configs saved in /etc/target/backup/.
Configuration saved to /etc/target/saveconfig.json

退出之后配置结果持久化到/etc/target/saveconfig.json。

使用tgt配置iscsi

再来介绍另外一种软件，就是tgt。 1.安装

1
2

yum install -y epel-release
yum install -y scsi-target-utils

启动服务

1

systemctl start tgtd

2.配置tgt 配置tgt使用的命令是tgtadm，有以下常用选项：

  • –lld –mode target –op new –tid –targetname # 新建target
  • –lld –mode target –op delete [–force] –tid # 删除target
  • –lld –mode target –op show # 查看所有的target
  • –lld –mode target –op show –tid # 查看指定id的target
  • –lld –mode target –op update –tid –name –value # 更新target
  • –lld –mode target –op bind –tid –initiator-address
    # target共享到指定网段
  • –lld –mode target –op bind –tid –initiator-name # target共享到指定的客户端名称
  • –lld –mode target –op unbind –tid –initiator-address
    # 解绑
  • –lld –mode target –op unbind –tid –initiator-name
  • –lld –mode logicalunit –op new –tid –lun –backing-store –bstype –bsopts –bsoflags # 创建lun
  • –lld –mode logicalunit –op delete –tid –lun # 删除lun
  • –lld –mode account –op new –user –password # 添加认证
  • –lld –mode account –op delete –user # 删除认证
  • –lld –mode account –op bind –tid –user [–outgoing] # 绑定认证
  • –lld –mode account –op unbind –tid –user [–outgoing] # 解绑认证

添加target

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

[root@localhost ~]# tgtadm --lld iscsi --mode target --op new --tid 1 --targetname iqn-2019-11.com.iscsi.test
[root@localhost ~]# tgtadm --lld iscsi --mode target --op show
Target 1: iqn-2019-11.com.iscsi.test
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00010000
            SCSI SN: beaf10
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            SWP: No
            Thin-provisioning: No
            Backing store type: null
            Backing store path: None
            Backing store flags: 
    Account information:
    ACL information:

添加lun

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

[root@localhost ~]# tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 22 -b /dev/sdb
[root@localhost ~]# tgtadm --lld iscsi --mode target --op show
Target 1: iqn-2019-11.com.iscsi.test
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00010000
            SCSI SN: beaf10
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            SWP: No
            Thin-provisioning: No
            Backing store type: null
            Backing store path: None
            Backing store flags: 
        LUN: 22
            Type: disk
            SCSI ID: IET     00010016
            SCSI SN: beaf122
            Size: 10737 MB, Block size: 512
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            SWP: No
            Thin-provisioning: No
            Backing store type: rdwr
            Backing store path: /dev/sdb
            Backing store flags: 
    Account information:
    ACL information:

注：这里有一个小提示，每个lun中的SCSI ID项是在客户端中的唯一标识，它的值是根据target id和lun id计算得到的，即：

1

SCSI ID = Target ID转16进制(前四位) + Lun ID转16进制(后四位)

所以lun 22的SCSI ID为00010016 共享到客户端：

1

[root@localhost ~]# tgtadm --lld iscsi --mode target --op bind --tid 1 --initiator-address 192.168.3.131

客户端连接

1.安装客户端

1
2

yum install -y epel-release
yum install -y iscsi-initiator-utils

客户端命令：

  • iscsiadm -m session # 查看所有会话
  • iscsiadm -m discovery -t st -p 192.168.3.150 #查看共享target
  • iscsiadm -m node -T iqn.2018-10.com.westos:storage1 -p 192.168.3.150 -l #登陆连接
  • iscsiadm -m node -T iqn.2018-10.com.westos:storage1 -u #退出登陆
  • iscsiadm -m node -T iqn.2018-10.com.westos:storage1 -o delete #删除登陆数据

2.发现设备

1
2

[root@localhost ~]# iscsiadm -m discovery -t st -p 192.168.3.150
192.168.3.150:3260,1 iqn.2018-10.com.westos:storage1

登录 注：请关闭防火墙和selinux

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13

[root@localhost mnt]# iscsiadm -m node -T iqn.2018-10.com.westos:storage1 -p 192.168.3.150 -l
Logging in to [iface: default, target: iqn.2018-10.com.westos:storage1, portal: 192.168.3.150,3260] (multiple)
Login to [iface: default, target: iqn.2018-10.com.westos:storage1, portal: 192.168.3.150,3260] successful.
[root@localhost ~]# lsblk 
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
fd0      2:0    1    4K  0 disk 
sda      8:0    0   40G  0 disk 
├─sda1   8:1    0  500M  0 part /boot
├─sda2   8:2    0    8G  0 part [SWAP]
└─sda3   8:3    0 31.5G  0 part /
sdb      8:16   0    2G  0 disk 
└─sdb1   8:17   0    2G  0 part 
sr0     11:0    1 1024M  0 rom

同时在/dev/disk/by-id下生成块设备。

更新于 2019-01-26
阅读原始文档
 linux
返回 | 主页